智能机器人

详细介绍

此款马达强磁直流减速电机，为我司为部分客户需要大扭力高转速有特殊要求的客户特别开发的一款电机，大量应用于各类小家电产品和智能产品上库存参数长期有货！拍下即发货！

特别主要推荐为航模履带车，卡车专用电机！

需要其它参数请联系掌柜沟通制样时间

电机单个重量约87克

	深圳市金皇冠微电机有限公司 Shenzhen Gold Crown Micromotor Co.,Ltd.
	GC-25RS370 DC SPUR GEAR MOTOR Series
	Main voltage:6VDC,12VDC,24VDC Typical Applications： P.NTIIt cameras,Grill,Oven,Cleaning machlne,Garbage dlsposers.Packing bank note machlne,Coffee machlne,Medical machlne,Manotat,Amuaament equipment, Infusion pumps,Offlce equipment,Househoid appllances,Automatlc

Motor data
Model	VOLTAGE	NO LOAD		LOAD TORQUE				STALL
		Speed	Current	Speed	Current	Torque	Output	Torque	Current
	V	R/min	mA	R/min	mA	gf/cm	W	gf/cm	mA
GC-370063000	6	3000	≤43	2200	≤80	15	0.35	68	520
GC-370064500	6	4500	≤56	3300	≤100	28	0.9	108	860
GC-370066000	6	6000	≤85	4500	≤120	35	1.69	143	1250
GC-370123000	12	3000	≤25	2200	≤72	22	0.56	89	420
GC-370124500	12	4500	≤35	3300	≤126	30	1.03	115	690
GC-370126000	12	6000	≤50	4500	≤220	38	1.7	165	980
Remarks:After connecting motor and gearbox(named gear motor)the output torque of gear motor=driving motor torquegear reduction rationgearinhg efficiency;Outpur speed pf gear motor=Driving motor speed/gear reduction ration
Gearbox Data
Number of stages	4stages reduction		5stages reduction		6stages reduction		7stages reduction
Reduction ratio	10,12,15,20		25,30,45,50,60		78,98,119,147		173,263,325,361
Gearbox Length "L"mm	20.8		23.2		25.6		28
Max.Running torque	0.25Kgf.cm		0.5Kgf.cm		1Kgf.cm		2Kgf.cm
Max.Gear breaking torque	8Kgf.cm		12Kgf.cm		16Kgf.cm		20Kgf.cm
Max.Gearing efficiency	65%		59%		53%		48%
Other reduction ratio please call or email to us.
NOTE: 1. Gear motor named methods:e.g.GC-25RS370123000-60K.as for Driving Motor, please refer to the motor data of RS-370123000:Gearbox, please refer to gearbox data of reduction ration 60. Related to the gear motor output speed & torque,please refer to the remarks in driving motor data: 2. Motor can be installed with magnetic encoder,for more details.pls refer to our company website: 3. Standard output shaft after reducing:￠6.Omm,othersizes of the output shaft can be made as clients request: 4. The gear materials can be ptastic.powder metallurgy, or 45# steel after heat-treatment: